W1160
Maneuverable Compact Articulated Loader
Refined compact frame design
Improved low center of gravity design
Outstanding mobility with tight turning radius
Sturdy and consistent working performance
- Overview
- Technical data
- Configurations
Product Introduction
Our compact loader paired with a snow blower attachment is purpose-built for high-altitude mountain farms and performs superbly in harsh winter conditions.The 4WD setup delivers steady grip on snow-covered and slippery inclines, while the snow blower quickly clears farm roads and yards.Featuring cold-resistant construction, it runs dependably in frigid mountain environments, and the adjustable snow chute supports broad clearing coverage.This complete solution maintains uninterrupted farm operations even during severe winter weather.
Product Specifications
Engine Rated Power (kw/HP)：18.4kW/2800rpm
Operating Weight (kg):1850 kg
Tipping Load with Bucket--Machine Straight (kg):850 kg
Bucket Pivot Point :520
Applications
Site Material Handling Loaders for Sand & Soil in European Construction Ideal for moving sand, soil and aggregates across European building sites, these loaders combine high efficiency with strong operational stability.They excel at short-distance material transport, work reliably on uneven ground, and greatly speed up on-site logistics.Designed for frequent daily use, they lower labor demands and help keep construction schedules on track efficiently. |
|
Farm Loaders for Grain Handling on European Farmlands These loaders are highly suitable for transporting harvested grain in European farmlands. They can efficiently move bulk grain and bagged crops between fields, silos and transport vehicles.With good adaptability to farmland terrain and easy operation, they effectively improve grain handling efficiency and reduce the heavy work of farmers during harvest season. |
|
Technical Data for W1160 Compact Loader | |
Engine | |
Brand/Model | Perkins 403J-11 or Kubota D1105 |
Type: | 3 Cylinders, Water Cooling |
Power Output | 18.2kW/3000rpm |
Displacement | 1.13 L |
Emissios Standard： | Euro Stage V |
Drive System | |
Type of Drive | Hydrostatic |
Gear Shift | Electric, Continuously Variable Transmissioin (CVT) |
Travel Speed | 0-13 km/h |
Electrical System | |
Operating Voltage | 12 V |
Battery Capacity | 72Ah |
Alternator Rating | 12V-40 A |
Hydraulic System | |
Max.Drive Hydraulics Work Pressure | 300 bar |
Max. Drive Hydraulics Discharge Volume | 84 l/min |
Max. Work Hydraulics Work Pressure | 180 bar |
Max. Work Hydraulics Discharge Volume | 33 l/min |
Boom Lifting Time | 3.1 s |
Automatic Levelling Function | yes |
Weight | |
Operating Weight | 1850 kg |
Tipping Load with Bucket--Machine Straight: | 850 kg |
Tipping Load with Bucket--Machine Pivoted: | 550 kg |
Bucket Capacity | 0.28 m3 |
Max.Lifting Force | 1100 kg |
Refilling Capacity | |
Fuel Tank (L) | 26 L |
Hydulic Oil Tank (L) | 40 L |
Engine Oil (L) | 4 L |
Coolant (L) | 12 L |
Brake System | |
Operating Brake | Transmission Drum Brake |
Parking Brake | Operating and Parking Brake in the Drive Train |
Tyre Size | 31x15.5-15 |
Machine Dimension (mm) | |
Overall Length with Bucket | 3895 |
Overall Length without Bucket | 3065 |
Bucket Pivot Point to the Centre of Axle | 520 |
Wheel Base | 1522 |
Rear Overhang | 950 |
Height to the Roof of Canopy | 2210 |
Seat Height | 1200 |
Working Range (mm) | |
Overall Working Height | 3180 |
Max. Lifting Height | 2740 |
Load-Over Height | 2385 |
Dumping Height | 1900 |
Digging Depth | 120 |
Overall Width | 1300 |
Wheel Track | 910 |
Ground Clearance | 221 |
Max. Turning Radius | 2435 |
Outter Turning Radius | 2220 |
Inner Turning Radius | 880 |
Articulation Angle | 51° |
Roll Back Angle at Max. Lifting Height | 52° |
Dumping Angle | 35° |
| 1.Engine: KUBOTA D1105 (Euro 5), Optional: Perkins |
| 2.Hydraulic System: German Rexroth pump, Gerotor motor, domestic valves; 1 pump + 2 motors, Inching function |
| 3.Boom Function: Floating function (optional) |
| 4.Control System: Electronic control levers with integrated forward/reverse buttons 5.(High/Low speed optional) |
| 6.Brake Inching Function (optional) |
| 7.Seat Sensor (optional) |
| 8.Lights: Turn signals, LED work lights |
| 9.EU-standard Hydraulic Quick Coupler,Quick change, customization supported |
 | 10.Tires: 31.5*15-15.5 |
| 11.Canopy: EPS,detachable, foldable, and closable. |
1. Feed Blade Main Application Scenarios Suitable for pushing feed mixtures including silage and compound concentrates along feeding alleys inside livestock farms. Core Functions The push plate supports wide-range hydraulic angle adjustment, while left-right swinging movement delivers flexible control over the feeding pushing direction. |
| ||
Parameter | Value Range | ||
Width | 1800 mm - 2200 mm | ||
Max. Adjustable Angle | 70° | ||
Weight | 225 kg | ||
| 2. Bale Fork Main Application Scenarios This attachment is designed to push feed mixes like silage and concentrated feeds toward feeding troughs in livestock barns. Core Functions The push plate can be adjusted over a wide angle via hydraulic control, and its side-to-side swing offers flexible adjustment of the pushing direction. | ||
Parameter | Value Range | ||
Width | 1130 mm | ||
Weight | 65 kg | ||
3. Round Bale Tong Main Application Scenarios Ideal for the transport and stacking of film-wrapped round bales in agricultural and livestock farming applications. Core Functions Grips bales gently with no damage, fully protecting the intactness of the outer film packaging. |
| ||
Parameter | Value Range | ||
Width | 1400mm | ||
Weight | 158 kg | ||
| 4. Fence Mower Main Application Scenarios Effectively trims weeds and brush surrounding fence posts, perfect for fence upkeep in farms, pastures and municipal green zones. Core Functions Neatly trims areas around fence posts; replaces manual trimming work; allows hydraulic switching between transport and working modes right from the operator cab. | ||
Parameter | Value Range | ||
Weight | 220 kg | ||
5. Double-blade Mowing Unit Main Application Scenarios Designed for hedge side trimming and multi-angle cutting work, it is widely used for hedge shaping in garden care and municipal landscaping projects. Core Functions Allows cutting and trimming across three different working positions, and performs side trimming to shape hedges into the required form efficiently. |
| ||
Parameter | Value Range | ||
Width | 1500 mm | ||
Weight | 200 kg | ||
